Xerox XDM1525D-WU User Manual - Page 109

Maintenance, Cleaning the Automatic Document Feeder

Page 109 highlights

Maintenance Maintenance This section contains information on maintenance, troubleshooting, uninstalling, scanner specifications, and spare parts. Cleaning the Automatic Document Feeder You may need to clean the ADF feed mechanism if your documents do not feed easily into the ADF, or several feed in at the same time. To clean the ADF: 1. Wet a cotton swab with some isopropyl alcohol (rubbing alcohol). 2. Press the ADF cover release on the top right of the scanner body to open the Automatic Document Feeder cover. 3. Wipe the feed roller from side to side. Rotate the roller to clean its entire surface. 4. Wipe the pad from top to bottom. Be careful not to snag the swab on the springs on either side of the pad. 5. Close the cover when you're finished. 104 DocuMate 152 Scanner User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

Maintenance
104
DocuMate 152 Scanner User’s Guide
Maintenance
This section contains information on maintenance, troubleshooting,
uninstalling, scanner specifications, and spare parts.
Cleaning the Automatic Document Feeder
You may need to clean the ADF feed mechanism if your
documents do not feed easily into the ADF, or several feed in at the
same time.
To clean the ADF:
1.
Wet a cotton swab with some isopropyl alcohol (rubbing
alcohol).
2.
Press the ADF cover release on the top right of the scanner
body to open the Automatic Document Feeder cover.
3.
Wipe the feed roller from side to side. Rotate the roller to clean
its entire surface.
4.
Wipe the pad from top to bottom. Be careful not to snag the
swab on the springs on either side of the pad.
5.
Close the cover when you’re finished.