Xerox XDM1525D-WU User Manual - Page 98
Setting Up Your Scanner to Work with PaperPort, TWAIN: Xerox DocuMate 152, WIA: Xerox, DocuMate 152
View all Xerox XDM1525D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Scanning from PaperPort Setting Up Your Scanner to Work with PaperPort When you selected a scanning option from the Scanner drop-down list, either TWAIN: Xerox DocuMate 152 or WIA: Xerox DocuMate 152, the Scan button at the bottom of the panel should become active. If it doesn't, you need to set up your scanner to work with the selected option. If this Scan button is not active, you need to setup your scanner. NOTE: Setting up your scanner is a one-time-only process for each option from the Scanner drop-down list. Therefore, you may have to set up your scanner once each for TWAIN: Xerox DocuMate 152 and WIA: Xerox DocuMate 152. The setup process, described below, is the same for each option. You will not have to set up the scanner again for an option unless you uninstall the scanner and PaperPort software, then re-install them. DocuMate 152 Scanner User's Guide 93