Xerox XDM1525D-WU User Manual - Page 112
Troubleshooting, Problem: With AutoCrop to Original selected, sometimes
![]() |
View all Xerox XDM1525D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Troubleshooting Maintenance In addition to the troubleshooting information contained in this section, please see the Readme file on your installation CD. The Readme file contains additional information that may help you diagnose problems with the scanner. If you try the troubleshooting procedures described in this section and in the Readme file, and the scanner still has problems, you may have a malfunctioning scanner. Refer to the technical support card that you received with your scanner. Also visit our web site at www.xeroxscanners.com for additional technical information. Problem: The scanner won't scan. What's wrong? Check for one of these possible problems: • Are the cables loose or not plugged in securely? Inspect the cable connections. Make sure the cables are plugged in securely. • Is the scanner's status light on? Turn on the scanner's power. If the status light doesn't come on, plug the power supply into another electrical outlet. • Did you restart the computer after installing the software? If you didn't restart the computer, it may not have loaded all of the software files. Try restarting your computer. • Did you plug the scanner into a USB hub? If you're using a USB hub to connect the scanner, the hub must have its own power supply. If the hub does not have its own power supply, plug the scanner into a USB port on the computer. • Did you select another scanning source in the PaperPort Scan Pane? If you use multiple devices with your computer, you may have selected another source for images. Start the PaperPort software and click the Scan icon, then make sure Xerox DocuMate 152 is selected as the scanner. Problem: During installation I got the error message: PaperPort Installation is not complete. What do I do? The installation procedure was not successful. You need to reinstall the PaperPort software. Problem: With AutoCrop to Original selected, sometimes I get blank pages, or pages with lines. What's wrong? The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages must be scanned in straight. Adjust the paper guides on the scanner so pages feed in straight. DocuMate 152 Scanner User's Guide 107
![](/manual_guide/products/xerox-xdm1525dwu-user-manual-87049c5/112.png)