Xerox XDM1525D-WU User Manual - Page 57
Straighten Image, Invert Image, Duplex, Skip Blank Originals
View all Xerox XDM1525D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Scanning • Straighten Image-Select this option to let the scanner automatically determine if a page is skewed, then straighten its image. The scanner detects page edges and can sense when the page is fed through at an angle. However, if the page is fed through at too great an angle, the image may not scan correctly. In that case, re-scan the page using the paper guides to feed the paper in straight. • Invert Image-Only available for Black&White Mode, this option reverses the black and whites of an image. Original Image Inverted Image • Duplex-Scan both sides of the page. If this option is not selected, the scanner will scan the face-down side of the page only. NOTE: Because you can set Duplex and Simplex for the One Touch buttons, there could be a conflict when you press the Simplex or Duplex button on the scanner. Regardless of the One Touch setting, the scanner button always takes precedence. In other words, even if the LED number on the scanner has a setting for Duplex, when you press the Simplex scanner button the scanner scans in Simplex mode, and vice versa. • Skip Blank Originals-Skips pages that are completely blank. Typically you use this option when you will scan a stack of two-sided pages which have a number of blank sides. This option is only available for Duplex scanning. 52 DocuMate 152 Scanner User's Guide