Xerox XDM5105D-WU User Guide - Page 112
Scan using Xerox DocuMate 510, Document, Feeder, Flatbed, Size, Preview, Tuning Your Scans.
![]() |
UPC - 785414106004
View all Xerox XDM5105D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Scanning with the WIA Interface The Scan using Xerox DocuMate 510 window opens.Use this window to select scanning options and start the scan process. 3. From the Paper Source drop-down list, choose Document Feeder to scan from the Automatic Document Feeder, or Flatbed to scan a from the Flatbed glass. 4. If you're scanning from the Automatic Document Feeder, select a paper size from the Page Size list. If you're scanning from the Flatbed glass, you can change the size of the scanned image after seeing a preview. 5. Click Preview to preview the image before scanning. The image is displayed on the right side of the window. NOTE: If you preview when scanning a stack of documents, the first page of the stack feeds through the ADF for the preview. After adjusting the scanner settings, replace that page on the stack so it is scanned with the rest of the pages. 6. Adjust settings of the previewed image as desired: • Change the button selection for the type of image. • Adjust the custom settings; refer to the next section, "Fine Tuning Your Scans". • If you're scanning from the Flatbed, change the size of the scanned image. To do this, click and hold the mouse pointer over one of the four sizing-boxes on the corners of the previewed image. Then drag the box to increase or decrease the size of the image. 7. Preview the image again. When you are satisfied with the image, click the Scan button. DocuMate 510 Scanner User's Guide 107
![](/manual_guide/products/xerox-xdm5105dwu-user-guide-d914950/112.png)