Xerox XDM5105D-WU User Guide - Page 119
You can now angle the roller assembly out and away from its
UPC - 785414106004
View all Xerox XDM5105D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Maintenance 3. Squeeze the plastic clamp that holds the roller in place, and then rotate the clamp forward until the locking tabs are free from the ADF cover. 4. Gently slide the roller to the right until the left side is free from its mounting hole. 5. You can now angle the roller assembly out and away from its housing. 6. Reverse the procedure to replace the new roller. Make sure both sides of the roller assembly are seated properly into their housings. 114 DocuMate 510 Scanner User's Guide
Maintenance
114
DocuMate 510 Scanner User’s Guide
3.
Squeeze the plastic clamp that holds the roller in place, and
then rotate the clamp forward until the locking tabs are free
from the ADF cover.
4.
Gently slide the roller to the right until the left side is free from
its mounting hole.
5.
You can now angle the roller assembly out and away from its
housing.
6.
Reverse the procedure to replace the new roller. Make sure
both sides of the roller assembly are seated properly into their
housings.