Xerox XDM5105D-WU User Guide - Page 118
Replacing the Roller Assembly
![]() |
UPC - 785414106004
View all Xerox XDM5105D-WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Maintenance Replacing the Roller Assembly After extended use, the roller may wear out and may need to be replaced. It is a user-replaceable part and can be ordered. See "Xerox DocuMate 510 Parts List" on page 122 for the part number. Frequent paper jams are a symptom of a worn roller assembly. A worn roller can cause documents to feed in skewed at an angle, or multiple pages to feed at the same time. In both cases, paper jams may occur. A worn roller should be replaced to avoid damage to the scanner's internal parts. However, before replacing the roller you should clean it first as excessive dust on the roller will make it appear worn and smooth to the touch. You cannot properly diagnose a worn roller until you have cleaned it. To replace the roller assembly: 1. Open the ADF cover. 2. The roller is located in the ADF cover. DocuMate 510 Scanner User's Guide 113
![](/manual_guide/products/xerox-xdm5105dwu-user-guide-d914950/118.png)