Xerox XK35C User Guide - Page 24
The Control Panel Display will show - ink cartridge
![]() |
UPC - 095205000351
View all Xerox XK35C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Setup (continued) 7 Turn the WorkCentre power switch on. The switch is located on the rear of the machine, next to the printer ports. Pressing the right, outer side turns the power on; pressing the left, inner side turns the power off. Power switch 8 The Control Panel Display will show 000 in a scrolling manner while the machine is initializing. 9 The Control Panel Display will show 001 when it is ready for use. Control Panel mode indicators are set to default values for this setup procedure. When you first power the machine on and there are no cartridges installed, you will see the error code E02 shown in the Display. This means there is no left (color) cartridge installed. This error code will disappear when you start the next procedure. 10 Proceed to the next step Installing & Aligning Ink Cartridges. 10 Getting Started
![](/manual_guide/products/xerox-xk35c-user-guide-adcdee6/24.png)