Xerox XK35C User Guide - Page 62

Cleaning the Cartridge Carrier Contacts

Get Xerox XK35C - WorkCentre Inkjet Multifunction PDF manuals and user guides
UPC - 095205000351
View all Xerox XK35C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Cleaning the Cartridge Carrier Contacts 1 Lift the scanner module. Lift the cartridge compartment lid/support up so the scanner module rests on the top edge of the lid/support. 2 Press the Menu button until the code U01 appears in the Display. 3 Press Start. 4 Unplug the power cord from the rear of the WorkCentre. 5 Remove both ink cartridges. 6 Use a CLEAN, LINT FREE, DRY CLOTH to clean the ink cartridge carrier contacts on the back wall of the carrier. 7 Reinstall the ink cartridges. 8 Close the cartridge compartment lid/support and the scanner module. 9 Plug the power cord into the WorkCentre. 10 Test the ink cartridges by running the Clean Print Head procedure. If the print quality is still unacceptable, contact the Xerox Customer Support Center at 1-800-TEAM XRX (see Preface/Calling for Service and Support). 48 Maintenance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
Maintenance
48
Cleaning the Cartridge Carrier Contacts
1
Lift the scanner module. Lift the cartridge compartment lid/support up so
the scanner module rests on the top edge of the lid/support.
2
Press the
Menu
button until the code
U01
appears in the Display.
3
Press
Start
.
4
Unplug the power cord from the rear of the WorkCentre.
5
Remove both ink cartridges.
6
Use a CLEAN, LINT FREE, DRY CLOTH to clean the ink cartridge
carrier contacts on the back wall of the carrier.
7
Reinstall the ink cartridges.
8
Close the cartridge compartment lid/support and the scanner module.
9
Plug the power cord into the WorkCentre.
10
Test the ink cartridges by running the Clean Print Head procedure. If the
print quality is still unacceptable, contact the Xerox Customer Support
Center at 1-800-TEAM XRX (see
Preface
/
Calling for Service and
Support
).