Xerox XK35C User Guide - Page 74

Display Error Codes The following error codes appear in the Control Panel Display when your machine has a problem. Use it to identify and solve problems. LED E01 . Meaning Paper is jammed inside the unit, or the paper feeder is empty. Solution n Remove jammed paper from the paper feeder or the paper exit tray, and press Stop. n If there is no paper in the paper feeder, load and press Stop. n If there is paper in the paper feeder, remove the paper, then reload paper and press Stop. E02 . No left cartridge Install the color ink cartridge. See Installing the Ink Cartridges. E03 . No right cartridge Install the black ink cartridge. See Installing the Ink Cartridges. E04 . One of the ink cartridges is not installed correctly. See CAUTION. Push each ink cartridge firmly toward the back of the machine until it snaps into place and press Stop. E05 . One or both cartridges are not in good condition. n Align the ink cartridges. See Aligning the Ink Cartridges. n Clean the cartridge nozzles and contacts. See Wiping the Print Nozzles and Contacts. n Replace the ink cartridges. See Replacing the Ink Cartridge. CAUTION: Non-Xerox ink cartridges will not fit correctly into the WorkCentre cartridge compartment. 60 Troubleshooting