Xerox XK35C User Guide - Page 63

Replacing the Ink Cartridge The ink cartridge includes the ink supply and the print head. Each time you replace the ink cartridge, you are replacing the print head as well. When you notice the print becomes light or one of the low ink Diagnostic Display LEDs lights turns on, replace your cartridge. NOTE: When either of the two ink cartridge Diagnostic Display LED lights turns on during PC printing, the machine continues printing. After PC printing is completed, replace the ink cartridge. Your machine counts ink droplets, and keeps ink low counts for both ink cartridges. Color Black Diagnostic Display LEDs To replace the ink cartridge, perform the following steps: 1 Load paper into the Automatic Paper Feeder. 2 Lift and open the entire scanner module. Support the scanner with the cartridge compartment lid/support. 3 Press the Menu button. A U01 message will appear in the Display. 4 Press Start. The cartridge assembly will move to the open change area. 5 The LCD window will display the L-C message. If you want to change the left cartridge (color) press Start, otherwise press Stop. The message will then change to message r-C . If you want to change the right cartridge (black), press Start, otherwise press Stop. 6 Pull the handle of the ink cartridge(s) you want to replace toward you until there is a click. Remove the ink cartridge(s). 7 Remove a new ink cartridge from its packaging and carefully remove the tape covering the print head. Hold the ink cartridge by the colored tab or black areas only. Do not touch the copper area. Ä Maintenance 49