Xerox XK35C User Guide - Page 29
Using the Automatic Paper Feeder/Loading - windows 7
UPC - 095205000351
View all Xerox XK35C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Using the Automatic Paper Feeder/Loading (continued) 4 Move the side paper guide to the right while squeezing the tab on the side paper guide. Slide the side paper guide until it lightly touches the side of the print media. NOTE: Do not press the guide too tightly to the edge of the print media. The guide may bend the media or prevent the media from feeding. 5 When you print a file from your PC using the Automatic Paper Feeder, make sure that you select the source and the correct paper size from your PC software application before starting your print job. You can also set paper size at the Control Panel. Loading Envelopes When printing envelopes, remember to use the envelope guide in the Automatic Paper Feeder. To load envelopes: 1 Pull the envelope guide out towards you until it snaps into place at a right angle to the paper tray. 2 Load envelopes with the address side facing you. The end of the envelope with the stamp area must enter the feeder first. The right edge of the envelope must align with the raised edge of the envelope guide. 3 Squeeze the side paper guide and move it to the right until it lightly touches the envelopes. NOTE: If envelopes jam while printing, try reducing the number of envelopes in the Automatic Paper Feeder. Fan the envelopes back and forth. CAUTION: Do not feed stamped envelopes. Never use envelopes with clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the printer. Getting Started 15