Xerox XK35C User Guide - Page 65
Cartridge Alignment
![]() |
UPC - 095205000351
View all Xerox XK35C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Cartridge Alignment You should print the cartridge alignment test if vertical lines or characters appear crooked. The cartridge alignment test will straighten the vertical lines. To Align the Cartridge from your PC: 1 Open the Xerox WorkCentre Control Program on LPT1. Refer to Starting the Xerox WorkCentre Control Program and to Using the Cartridges Tab. 2 Click Align Cartridges. 3 The printer feeds a sheet of paper and prints the alignment test pattern. 4 Examine the test print. If the vertical lines are straight, no adjustment is needed. If the lines are not straight, select the number in which the lines appear the straightest and click OK. To Align the Cartridge Using the WorkCentre Control Panel: 1 Press the Menu button on the Control Panel repeatedly until the Message Code U02 appears in the Display. 2 Press Start. NOTE: The machine will time out after one minute if Start is not pressed, and will return to Standby Mode. The Display will then show 001 . Press Menu repeatedly until you see the code U02 displayed, then press Start to repeat the cartridge alignment process. 3 An alignment test pattern sheet will print during which time the Display will show L-P . Review this sheet in response to the next series of six Display messages. Ä Maintenance 51
![](/manual_guide/products/xerox-xk35c-user-guide-adcdee6/65.png)