Yamaha CP50 Reference Manual - Page 38

Page 2 On-screen name (and full name) Mode Meas (Measure) 3 Tempo Beat Click 4 RecCount Undo Description This parameter is used to select a recording mode. It is not available, however, when Rec has been set to "Wave". Setting values: replace or overdub replace Any data contained within the User Song selected for recording will be overwritten with your new performance data. overdub Your new performance data will be added to any data contained within the User Song selected for recording. This parameter is used to select the start point for recording. It is not available, however, when Rec has been set to "Wave". Setting values: 001 to 999 NOTE If you have selected a User Song already containing data for recording, the Meas parameter can be set to any measure up to the last one containing data. This parameter is used to select the playback tempo for the backing track and metronome. When Rec has been set to "Song", this tempo will be used for playback after recording. The tempo can also be adjusted using the Tempo parameter from the Song Setting screen (page 35). Setting values: 30 to 300 NOTE To synchronize the backing-track tempo with that of an external MIDI device or DAW application, set the MIDISyn parameter (page 46) from Page 6 of the Utility screen to "ext" or "auto". When "ext" is selected or when "auto" is selected and MIDI Clock messages are being received from an external source, the tempo will be displayed as "ext" and modification will not be possible. This parameter is used to set a time signature for the backing track and metronome. The time signature can also be adjusted using the Beat parameter from the Song Setting screen (page 35). Setting values: 1/4 to 16/4, 1/8 to 16/8, 1/16 to 16/16 This parameter is used to turn the metronome on and off. The same setting can be made using the Click parameter from Page 7 of the Utility screen. Setting values: on or off This parameter is used to turn count-in at the start of recording on or off. The same setting can be made using the RecCnt parameter from Page 7 of the Utility screen. Setting values: on or off This parameter becomes available whenever recordings have been made, and it allows you to undo the most recent. When you press Knob 3 to undo a recording, you will be asked to confirm that you wish to proceed. To do so, press either Knob 1 (YES [PUSH]) or the [ENTER] button. To cancel the undo process, press either Knob 3 (NO [PUSH]) or the [EXIT] button. It should be noted that this parameter will not become available when Rec has been set to "Wave". Internal Design of the CP5 & CP50 Reference Left & Right Parts 3
[VOICE] 3
[PRE-AMP] 3
[MOD-FX] 3
[PWR-AMP] (CP5 only) 3
[LEFT1]/[LEFT2]/[RIGHT1]/ [RIGHT2] (CP5) [LEFT]/[RIGHT] (CP50) 3
[COMMON] Song Setting Area 3
[SONG SETTING] 3
[RECORD] TRACK Part 3
[TRACK] MIC INPUT Part 3
[MIC INPUT] (CP5 only) Settings for All Parts 3
[REVERB] Settings for All Performances 3
[MASTER COMPRESSOR] 3
[UTILITY] 3
[FILE] Appendix 38 CP5/CP50 Reference Manual