Yamaha CP50 Reference Manual - Page 48
Notice - factory reset
UPC - 086792936963
View all Yamaha CP50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Page On-screen name (and full name) Description A (11) Bright (Brightness) This parameter is used to set the brightness of the stage piano's display. Setting values: 1 to 4 (brightest) NOTE The brightness can also be reduced by holding down the [UTILITY] button and pressing the [- PAGE] button, and it can be increased by holding down the [UTILITY] button and pressing the [PAGE 3] button. AutoLoad This parameter is used to turn on or off automatic loading of an All file (page 51) from the plugged-in USB flash-memory device when the stage piano is turned on. In order to use this function, the name of the All file for automatic loading must be set to either "AUTOLOAD.C5A" (CP5) or "AUTOLOAD.C6A" (CP50). Furthermore, the auto-load file must be saved to the root directory of a USB flash-memory device, and that device must be plugged into your stage piano before it is turned on. Setting values: on or off B (12) StartUp This parameter is used to select the Performance to be automatically selected when you turn on your CP5 or CP50. Setting values: PRE1: A01 to D10, PRE2: A01 to D10, PRE3: A01 to D10 USR1: A01 to D10, USR2: A01 to D10, USR3: A01 to D10 EXT1: A01 to D10, EXT2: A01 to D10, EXT3: A01 to D10 C (13) BulkDmp Using the Bulk Dump function, all data for the currently-selected Performance can be sent to a computer or external MIDI device in the form of MIDI system exclusive data (i.e., bulk data). Press Knob 1 to perform a Bulk Dump. When asked to confirm that you wish to proceed, press Knob 1 (YES [PUSH]) or the [ENTER] button to do so. Alternatively, if you do not wish to proceed, press Knob 3 (NO [PUSH]) or the [EXIT] button. NOTE In order to utilize the Bulk Dump function, the DevNo. parameter (page 45) must be used to set the stage piano's device number correctly. For more details on Bulk Dump procedures, refer to the Owner's Manual booklet. FactSet (Factory Reset) The Factory Set function can be used to restore the stage piano's User Memory to its initial condition. Press Knob 2 to perform a Factory Reset. When asked to confirm that you wish to proceed, press Knob 1 (YES [PUSH]) or the [ENTER] button to do so. Alternatively, if you do not wish to proceed, press Knob 3 (NO [PUSH]) or the [EXIT] button. NOTICE Whenever the Factory Set function is used to restore initial settings, all Performance data, all User Songs, and system settings (i.e., from the Utility area, the Master Compressor block, and the Transpose area, etc.) within User Memory will be reset to the default condition. Care should, therefore, be taken to avoid overwriting irreplaceable data. Furthermore, it is wise to regularly create backup copies of important Performance data and system settings on a USB flash-memory device, computer, or the like. Internal Design of the CP5 & CP50 Reference Left & Right Parts 3[VOICE] 3[PRE-AMP] 3[MOD-FX] 3[PWR-AMP] (CP5 only) 3[LEFT1]/[LEFT2]/[RIGHT1]/ [RIGHT2] (CP5) [LEFT]/[RIGHT] (CP50) 3[COMMON] Song Setting Area 3[SONG SETTING] 3[RECORD] TRACK Part 3[TRACK] MIC INPUT Part 3[MIC INPUT] (CP5 only) Settings for All Parts 3[REVERB] Settings for All Performances 3[MASTER COMPRESSOR] 3[UTILITY] 3[FILE] Appendix 48 CP5/CP50 Reference Manual