Yamaha CVP-701 CVP-701 Reference Manual - Page 102

CONFIG2 Call up the operation display. [FUNCTION] → TAB [-][3] MENU1 → [J] UTILITY → TAB [-][3] CONFIG2 Select the desired parameter: 1 Speaker 2 Voice Category Button Options/Display-related Settings 12 Utility / System - Making Global Settings - 1 Speaker-related settings [1]/ SPEAKER [2] [3]/ STEREOPHONIC [4] OPTIMIZER [5]/ [6] [7] AUX IN NOISE GATE I.A. CONTROL ON/OFF [8] I.A. CONTROL DEPTH Determines whether or not the speaker will sound. HEADPHONE SW Speaker sounds normally, but is cut off when headphones are inserted to the PHONES jack. ON: Speaker sound is always on. OFF: Speaker sound is off. You can only hear the instrument sound via the headphones. Turns the Stereophonic Optimizer on or off. • On......This function is effective on the VRM Voices sounded from the headphone(s) connected to the [PHONE] jack(s). NOTE In case the "Speaker" setting above is "On" and headphone(s) are connected to the [PHONES] jack(s), this function is effective on the VRM Voices from the headphone(s) as well as from the speakers of the instrument. NOTE In case the headphone(s) are connected to the [PHONES] jack(s) and external audio devices are connected to the AUX OUT[L/L+R]/[R] jacks, this function is effective on the VRM Voices from the headphone(s) as well as from the audio devices. • Off .....The effect of Stereophonic Optimizer is not applied. This effect mutes the input signal when the input from the AUX IN falls below a specified level. I.A. Control (Intelligent Acoustic Control) is a function which automatically adjusts and controls the sound quality according to the overall volume of the instrument. Even when the volume is low, it permits both low sounds and high sounds to be clearly heard. I.A. Control is effective only from the sound output of the instrument speakers. This sets the depth of the I.A. Control. The higher the value, the more clearly that low and high sounds are heard at lower volume levels. 102 CVP-701 Reference Manual