Yamaha CVP-701 CVP-701 Reference Manual - Page 77

3 If you intend to use a pedal to switch Registration Memory settings, specify here how the pedal will be used - to advance or to reverse through the sequence. Use the [C] (REGIST+ PEDAL) button to select the pedal for advancing through the sequence. Use the [D] (REGIST- PEDAL) button to select the pedal for reversing through the sequence. Indicates the name of the currently selected Registration Memory Bank. 6 3 4 NOTE If you assign the function to a pedal here, the other function set in the PEDAL display (page 88) becomes invalid. 4 Use the [E] (SEQUENCE END) button to determine how Registration Sequence behaves when reaching the end of the sequence. • STOP Pressing the TAB [3] button or the "advance" pedal has no effect. The sequence is "stopped." • TOP The sequence starts again at the beginning. • NEXT BANK The sequence automatically moves to the beginning of the next Registration Memory Bank in the same folder. 5 Program the Sequence order, from left to right. Press one of the REGISTRATION MEMORY [1] - [8] buttons on the panel, then press the [6] (INSERT) button to input the number. 9 Indicates the Registration Memory numbers, in the order of the current Registration Sequence. Registration Memory - Saving and Recalling Custom Panel Setups - [1] - [4] [5] [6] [7] [8] CURSOR REPLACE INSERT DELETE CLEAR Moves the cursor. Replaces the number at the cursor position with the currently selected Registration Memory number. Inserts the number of the currently selected Registration Memory number before the cursor position. Deletes the number at the cursor position. Deletes all numbers in the sequence. 6 Press the [F] button to turn the Registration Sequence function on. 7 Press the [EXIT] button to exit from the operation display. NOTE If you do not close the setting display and it remains open, you cannot call up the Registration Sequence even when you press the pedal. CVP-701 Reference Manual 77