Yamaha CVP-701 CVP-701 Reference Manual - Page 89

3 Use the [1] buttons to select the function to be assigned to the pedal specified in step 2. For information on available parameters, see pages 89 - 91. NOTE You can also assign other functions to the pedal - Punch in/out of Song (page 57) and Registration Sequence (page 76). If you assign multiple functions to the pedal, the priority is: Punch in/out of Song → Registration Sequence → functions assigned here. 4 Use the [2] - [8] buttons to set the details of the selected functions (the part for which the function is applied, etc.). The available parameters differ depending on the function selected in step 3. 5 When you have selected the left or center pedal in step 2, press the [H] (SWITCH WITH R1 VOICE) button to turn this parameter OFF. This setting locks the pedal function so that it does not change automatically when you change the Right 1 Voice. 6 If necessary, set the polarity of the pedal by using the [I] button. Pedal on/off operation may differ depending on the particular pedal you've connected to the instrument. For example, pressing down on one pedal may turn the selected function on, while pressing a different make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation.  Assignable Pedal Functions For functions indicated with "*", use only the foot controller; proper operation cannot be done with a footswitch. ARTICULATION VOLUME* SUSTAIN SOSTENUTO SOFT When you use a Super Articulation Voice that has an effect assigned to the pedal/footswitch, you can enable the effect by pressing the pedal/footswitch. You can turn this function on or off for each keyboard part on this display. Allows you to use a foot controller to control the volume. This function is available only for the pedal connected to the instrument's AUX PEDAL jack. Allows you to use a pedal to control the sustain. When you press and hold the pedal, all notes played on the keyboard have a longer sustain. Releasing the pedal immediately stops (damps) any sustained notes. If you are using the right pedal or connected foot controller, the "HALF PEDAL POINT" parameter allows you to specify how far down you should press on the pedal until the damper effect starts working. Allows you to use a pedal to control the Sostenuto effect. If you play a note or chord on the keyboard and press the pedal while holding the note(s), the notes will sustain as long as the pedal is held. However, all subsequent notes will not sustain. This makes it possible to sustain a chord, for example, while other notes are played staccato. NOTE This function will not affect any of the Organ Flutes and only some of the Super Articulation Voices, even if this has been assigned to the Foot Pedals. Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces the volume and changes the timbre of the notes you play. This is effective only for certain appropriate Voices. You can turn this pedal function on or off for each keyboard part on this display. If you are using the right pedal or connected foot controller, the "HALF PEDAL POINT" parameter allows you to specify how far down you should press on the pedal until the soft effect starts working. Connections - Using Your Instrument with Other Devices - 11 CVP-701 Reference Manual 89