Yamaha DTX700 Owner's Manual - Page 13

Setup Setting Up for Sound Connecting the Adaptor 1 Ensure that your DTX700 is turned off (i.e., the screen is not lit). 2 Insert the power adaptor's DC plug into the [ ] connector on the rear panel. 3 Hook the power adaptor's cord around the cord clip to secure it in place. CAUTION • Excessive bending can damage the power adaptor's cord and create a fire hazard. Ensure, therefore, that the power cord is not bent at an extreme angle when wrapped around the clip. 4 Plug the power adaptor's AC power cord into an AC wall socket or another electrical outlet. WARNING • Use only the power adaptor that came with your DTX700. CAUTION • The DTX700 remains charged and draws a small amount of power even when the (Standby/On) button is set to the Standby position. For this reason, you should always unplug the power adaptor from the wall socket if the instrument will not be used for an extended period of time. Cord clip Power adaptor cord Connecting Speakers or Headphones Your DTX700 does not come with built-in speakers. In order to hear it, therefore, you will need to connect headphones or a DTX-series monitor system, such as the MS40DR.  Connecting Speakers Connect your speakers to the OUTPUT [L/MONO] and [R] jacks (standard mono-audio).  Connecting Headphones Connect your headphones to the [PHONES] jack (standard stereo-audio). The [PHONES] knob on the control panel can be used to adjust the volume of the headphones. CAUTION • To prevent hearing loss, avoid using headphones at high volumes for extended periods of time. Connecting a Music Player You can connect a portable music player or another similar source of audio to your DTX700 via the [AUX IN] (auxiliary input) stereo mini-jack. This makes it possible to play along with your favorite songs. NOTICE • Whenever connecting other devices, ensure that the cables you use have plugs that match the input or output connectors on those devices. • Before making connections, furthermore, you should also turn the volume on the other devices fully down. • When all connections have been made, use each device's volume controller to balance its output with that of the DTX700. External MIDI device Speakers with a built-in amplifier MIDI IN MIDI cable MIDI Standard mono audio OUT cable (6.3-mm dia.) Mobile music player, etc. Mini stereo audio cable (3.5-mm dia.) Standard stereoaudio jack (6.3-mm dia.) DTX700 Owner's Manual 13