Yamaha DTX700 Owner's Manual - Page 21

Basic DTX700 Operations Basic Operation Storing Settings Whenever you change a DTX700 setting, the [STORE] button will light up to remind you to store your new setting in the instrument's internal memory. To do so, proceed as follows. 1 Make sure that the [STORE] button is lit. 2 Press the [STORE] button. You will be asked to confirm that you wish to proceed. NOTE • You can press the [EXIT] button to return to the previous page without storing. 3 Press the dial to store your settings. The [STORE] button will go out, confirming that your settings have been permanently stored. NOTICE • If you turn off the DTX700 without storing any changes you have made to settings, those changes will be lost. Connecting a USB Memory Device You can plug a USB memory device into the [USB TO DEVICE] port on the side panel of your DTX700.  Precautions when using the [USB TO DEVICE] port Whenever connecting a USB device to your DTX700 via the [USB TO DEVICE] port, be sure to observe the following important precautions. NOTICE • Use a USB A-B cable of no more than 3 meters in length. NOTE • For more details on how to use your USB memory device, refer to the owner's manual that came with it. Supported USB memory devices Flash drives and other USB-compatible, mass storage devices may be used with the DTX700. This instrument does not necessarily support all commercially available USB memory devices, and Yamaha cannot guarantee the operation of all such devices. Before purchasing a USB device for use with this instrument, therefore, please check with your Yamaha dealer or an authorized Yamaha distributor, or visit this web page: http://dtxdrums.yamaha.com/ NOTE • Other USB devices, such as a computer keyboard or mouse, are not supported. Connecting a USB memory device Before plugging in a USB memory device, ensure that its connector matches the shape of the DTX700's [USB TO DEVICE] port and that both are oriented in the same direction. The [USB TO DEVICE] port supports the USB 1.1 standard; however, you can plug in and use USB 2.0 memory devices. It should be noted that data will be transferred at the USB 1.1 speed in such a case. NOTE • USB 3.0 cables cannot be connected to the DTX700.  Using a USB memory device With a USB memory device plugged into the DTX700, you will be able to save data that you have created and to import settings and audio data. Initializing a USB memory device Certain types of USB memory device must be initialized before they can be used with this instrument. For details on how to do this, refer to the Reference Manual PDF document. NOTICE • When a USB memory device is initialized, all data saved on it will be permanently erased. Before formatting such a device, therefore, ensure that any important data has been copied to another location. Write protection Certain types of USB memory device can be write-protected to prevent data from being accidentally erased. If your USB memory contains important data, we suggest that you activate write protection to prevent accidental erasure. Meanwhile, if you need to save data on a USB flash-memory device, be sure to disable its write protection. DTX700 Owner's Manual 21