Yamaha DTX700 Owner's Manual - Page 54
Setting up Cubase Remote Control, Basic Operation, Computer settings, DTX700 settings - driver
View all Yamaha DTX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Basic Operation Connecting Your DTX700 to a Computer Setting up Cubase Remote Control Using a special feature, the DTX700 can operate as a remote controller for Cubase. For example, you can operate the Cubase transport, turn its metronome on or off, and control various other functions from the instrument's control panel, significantly increasing the efficiency of your music production workflow. Computer settings When setting up Cubase remote control for the first time, complete the following steps to configure your computer correctly. 1 Download the latest version of the DTX700 Extension from the following web page. Save the compressed file in a convenient location and then expand it. http://dtxdrums.yamaha.com/downloads/ NOTE • Ensure that you have the latest USB MIDI driver installed on your computer (see page 52). • Information on system requirements is also provided on the above web page. • The DTX700 Extension may be revised and updated without prior notice. Before installing, visit the above web page to confirm the latest related information and ensure that you have the most up-to-date version. 2 Execute the expanded DTX700 Extension to carry out the required installation procedure. For more details, refer to the owner's manual included in the downloaded package. 3 Hold down the [SHIFT] button and press the [MENU] button. The message "Cubase Remote" will be displayed to confirm that the function has been activated. NOTE • When Cubase Remote mode has been activated, those control-panel buttons that can be used will light up. 4 To deactivate Cubase Remote mode, again hold down the [SHIFT] button and press the [MENU] button. Using remote functions NOTE • For details on how to use remote functions, refer to the owner's manual included in the downloaded package. DTX700 settings Whenever the Cubase Remote function is to be used, the following steps must be completed on the DTX700. 1 Use [MENU] m [Utility] m [MIDI] to access the MIDI parameters, and set MIDI IN/OUT to "USB". 2 Ensure that the DTX700 is connected to your computer in the correct manner, and then launch Cubase. For details on how to connect the DTX700 to your computer, see page 52. 54 DTX700 Owner's Manual