Yamaha DTX700 Owner's Manual - Page 22

Basic Operation Basic DTX700 Operations NOTICE • If using a self-powered type USB memory device, turning it on and off repeatedly could cause your DTX700 to freeze and stop operating. The same applies to the frequent plugging in and unplugging of USB cables. Such action should, therefore, be avoided. • Data stored on the DTX700 or within the USB memory device may be corrupted if they are disconnected or turned off at the wrong time. Be sure, therefore, to avoid unplugging the USB memory device from the [USB TO DEVICE] or turning off either device while data is being transferred. 6 Press the [F3] button. You will be asked to confirm that you wish to restore the Factory Set. Restoring Default Settings Straight out of the box, your DTX700 already contains a wide range of pre-programmed drum kits, instruments, and songs. This collection of default settings - the Factory Set - can be conveniently restored at any time if you have accidentally overwritten them or wish to delete all of your own settings. To do so, use the Factory Set function as follows. 1 Press the [MENU] button. If you do not wish to do so, press the [EXIT] button to return to the previous page. 7 Press the dial to restore the Factory Set. 2 Turn the dial to move the cursor to "Utility". 3 Press the dial. 4 Turn the dial to move the cursor to "FactSet". 5 Press the dial. 22 DTX700 Owner's Manual NOTICE • Whenever the Factory Set is restored, any settings you have made will be overwritten with the corresponding defaults. Important user-defined data should, therefore, be saved on a USB memory device in advance. For full details, refer to the Reference Manual PDF document. NOTE • If you select the "PowerOn Auto" checkbox on the page displayed for Step 6 above, the Factory Set will be restored each time you turn on your DTX700.