Yamaha DVR-S150 Owners Manual - Page 16
Using commercially available speakers or cables, To replace speaker cables - subwoofer
View all Yamaha DVR-S150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
PREPARATION Connecting Speakers Using commercially available speakers or cables When using speakers or cables other than those of the YAMAHA NX-P150 (consisting of four satellite speakers, a center speaker and a subwoofer) and its supplied cables, be careful of the following. When using a commercially available speaker cable, remove the cable plug from one of the supplied speaker cables and attach it to the cable you are using. When using commercially available speakers • Use speakers with 6-ohm impedance or more. If a speaker with less than 6-ohm impedance is used, the protective circuit may trip or the speaker may malfunction. • Use magnetically shielded speakers to prevent interferences with a TV. If these speakers still interfere with a TV, move the speakers a little away from the TV. • We recommend using speakers of the same manufacturer that have identical sound qualities. If they are mixed, certain sounds may be heard unnaturally. • Use speaker cables that are the same thickness as the supplied cables. When using commercially available speaker cables • Use speaker cables that are the same thickness as the supplied cables. 2 Peel away about 10 mm (10/32") of covering from the tip of the new cable and twist the cable core firmly in a clockwise direction. 10 mm (10/32") Clockwise Note Be sure to twist the cable core firmly in a clockwise direction. Twisting loosely may cause a short. 3 Press and hold the release button, insert the cable core into the cable plug, then release the button. Match the speaker cable polarity (+/-) with the polarity mark (+/-) of the cable plug. Polarity mark - Polarity mark + ■ To replace speaker cables 1 Press and hold the release button and remove the supplied speaker cable from the cable plug. Release button 11