Yamaha DVR-S150 Owners Manual - Page 29

Error and warning messages, Connect MIC, Unplug HP, NO FRONT L, NO SURR L, NO SIGNAL, CANCEL

Get Yamaha DVR-S150 PDF manuals and user guides View all Yamaha DVR-S150 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Auto Speaker Setup (YPAO) ■ Error and warning messages If an error or warning message appears, check the cause and follow the remedy corresponding to the message, then carry out the setup procedure once more (page 21). Error messages before setup Error message Connect MIC Cause Optimizer microphone is not connected. Unplug HP Headphones are connected. Remedy • Connect the supplied optimizer microphone to the YPAO MIC jack on the front panel. • Unplug the headphones. Error and warning messages during setup Message NO FRONT L NO FRONT R NO SURR L Cause The front left channel signal is not detected. The front right channel signal is not detected. The left surround channel signal is not detected. Remedy • Select the front speakers with SPEAKER A or B. • Check the front left speaker connection. • Select the front speakers with SPEAKER A or B. • Check the front right speaker connection. • Check the left surround speaker connection. NO SURR R The right surround channel signal is not detected. • Check the right surround speaker connection. NO SIGNAL CANCEL The optimizer microphone does not detect test tones. • The setup procedure was cancelled due to user activity. • The setup procedure was cancelled because YPAO ON/OFF was pressed. • Check the microphone setting. • Check the speaker connections and placement. • Perform the setup procedure again. Do not adjust VOLUME (etc.) during the auto setup procedure. Error messages after setup If "WARNING" appears in the display after measurement is complete: Press or . The error message appears. If multiple errors are detected, press or to switch between them. Message W PHASE L W PHASE R W PHASE C W PHASE SR L W PHASE SR R Cause Remedy The speaker polarity (+/-) for the front left channel is • Check the speaker connection for the proper polarity incorrect. This message may appear even if the speaker (+ or -). is connected correctly. The speaker polarity (+/-) for the front right channel is • Check the speaker connection for the proper polarity incorrect. This message may appear even if the speaker (+ or -). is connected correctly. The speaker polarity (+/-) for the center channel is • Check the speaker connection for the proper polarity incorrect. This message may appear even if the speaker (+ or -). is connected correctly. The speaker polarity (+/-) for the surround left channel • Check the speaker connection for the proper polarity is incorrect. This message may appear even if the (+ or -). speaker is connected correctly. The speaker polarity (+/-) for the surround right • Check the speaker connection for the proper polarity channel is incorrect. This message may appear even if (+ or -). the speaker is connected correctly. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
Auto Speaker Setup (YPAO)
24
■
Error and warning messages
If an error or warning message appears, check the cause and follow the remedy corresponding to the message, then carry
out the setup procedure once more (page 21).
Error messages before setup
Error and warning messages during setup
Error messages after setup
If “WARNING” appears in the display after measurement is complete:
Press
or
.
The error message appears. If multiple errors are detected, press
or
to switch between them.
Error message
Cause
Remedy
Connect MIC
Optimizer microphone is not connected.
•
Connect the supplied optimizer microphone to the
YPAO MIC jack on the front panel.
Unplug HP
Headphones are connected.
•
Unplug the headphones.
Message
Cause
Remedy
NO FRONT L
The front left channel signal is not detected.
•
Select the front speakers with SPEAKER A or B.
•
Check the front left speaker connection.
NO FRONT R
The front right channel signal is not detected.
•
Select the front speakers with SPEAKER A or B.
•
Check the front right speaker connection.
NO SURR L
The left surround channel signal is not detected.
•
Check the left surround speaker connection.
NO SURR R
The right surround channel signal is not detected.
•
Check the right surround speaker connection.
NO SIGNAL
The optimizer microphone does not detect test tones.
•
Check the microphone setting.
•
Check the speaker connections and placement.
CANCEL
•
The setup procedure was cancelled due to user
activity.
•
The setup procedure was cancelled because YPAO
ON/OFF was pressed.
•
Perform the setup procedure again. Do not adjust
VOLUME (etc.) during the auto setup procedure.
Message
Cause
Remedy
W PHASE L
The speaker polarity (+/–) for the front left channel is
incorrect. This message may appear even if the speaker
is connected correctly.
•
Check the speaker connection for the proper polarity
(+ or –).
W PHASE R
The speaker polarity (+/–) for the front right channel is
incorrect. This message may appear even if the speaker
is connected correctly.
•
Check the speaker connection for the proper polarity
(+ or –).
W PHASE C
The speaker polarity (+/–) for the center channel is
incorrect. This message may appear even if the speaker
is connected correctly.
•
Check the speaker connection for the proper polarity
(+ or –).
W PHASE SR L
The speaker polarity (+/–) for the surround left channel
is incorrect. This message may appear even if the
speaker is connected correctly.
•
Check the speaker connection for the proper polarity
(+ or –).
W PHASE SR R
The speaker polarity (+/–) for the surround right
channel is incorrect. This message may appear even if
the speaker is connected correctly.
•
Check the speaker connection for the proper polarity
(+ or –).