Yamaha GW10 Owner's Manual - Page 16
Guided Tour - power supply
View all Yamaha GW10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Guided Tour SETTING UP AND PLAYING YOUR GW10 Once you've taken your GW10 out of the box and are ready to use it, you'll have to make a few connections and follow some simple instructions on setting it up. 1 First, make sure that the power switch on the GW10 is off before making ANY connections. 2 Plug the DC output cable from the power adaptor into the DC IN terminal on the rear panel, then plug the adaptor into a convenient AC outlet. AC outlet LEVEL INPUT R L / MONO OUTPUT DC IN ON / OFF POWER DC IN The cable clip located next to this terminal helps to prevent accidental unplugging of the power supply during use. Wrap the adaptor cord firmly around the clip (see the Rear Panel illustration, page 7). CAUTION! s Do not attempt to use a different AC adaptor with the GW10. Also, be sure to check whether the rated voltage is appropriate. (See the precaution "USE THE CORRECT POWER SUPPLY" on page 2.) s 3 Plug your instrument into the INPUT jack on the rear panel. 12 Guided Tour LEVEL INPUT R L / MONO OUTPUT DC IN ON / OFF POWER INPUT For the sake of these instructions, we'll assume you're using an electric guitar; however, most any electronic instrument can be used.