Yamaha GW10 Owner's Manual - Page 23

LEDs above the Effect Block buttons.

Page 23 highlights

Depending on the preset selected, the Foot Controller turns different groups of effect blocks on and off. You can instantly check which effect blocks are enabled for this function by looking at the green ON OFF GROUP LEDs above the Effect Block buttons. For example, in bank 1, program number 2, the ON OFF GROUP LEDs above CHO and DLY are lit. These are lit to indicate that the two corresponding effect blocks can be turned on/off with the Foot Controller. ON OFF GROUP / TUNER WRITE COPY SWAP DST CHO DLY NOTE s Be sure to press the Foot Controller down firmly when using this function; the effect block or blocks may not be properly turned on or off if the Foot Controller is not pressed down all the way. s Guided Tour 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

19
Guided Tour
Depending on the preset selected, the Foot Controller turns different groups
of effect blocks on and off.
You can instantly check which effect blocks
are enabled for this function by looking at the green ON OFF GROUP
LEDs above the Effect Block buttons.
For example, in bank 1, program
number 2, the ON OFF GROUP LEDs above CHO and DLY are lit.
ON OFF GROUP / TUNER
DST
CHO
DLY
WRITE
COPY
SWAP
These are lit to indicate that the two
corresponding effect blocks can be
turned on/off with the Foot Controller.
NOTE
Be sure to press the Foot Controller down firmly when using this
function; the effect block or blocks may not be properly turned on or off if
the Foot Controller is not pressed down all the way.