Yamaha PSR-A5000 PSR-A5000 Reference Manual_EN - Page 93
PSR-A5000, Reference Manual, Microphone, Noise Gate - guitar center
View all Yamaha PSR-A5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
r 3 Band EQ t Noise Gate y Compressor u Talk Mixing (only when "Talk" is selected) EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can be boosted or cut as required to tailor the overall frequency response. The instrument features a three-band (Low, Mid and High) digital equalizer function for the microphone sound. For each of three bands, you can adjust the center frequency (Hz) and level (dB) via the corresponding knobs on the display. This effect mutes the input signal when the input from the microphone falls below a specified level. This effectively cuts off extraneous noise, allowing the desired signal (vocal, etc.) to pass. On/Off Turns Noise Gate on or off. Threshold Adjusts the input level above which the gate begins to open. This effect holds down the output when the input signal from the microphone exceeds a specified level. This is especially useful for smoothing out vocals that have widely varying dynamics. It effectively "compresses" the signal, making loud parts softer, or vice versa. On/Off Turns Compressor on or off. Threshold Adjusts the input level above which compression begins to be applied. Ratio Adjusts the compression ratio. Higher ratios result in a more compressed sound, with a reduced dynamic range. Out Adjusts the final output level. For making settings for speech (e.g., talking or making announcements between songs during a performance). Pan Determines the stereo pan position of the microphone sound. Reverb Determines the depth of the reverb effects applied to the microphone sound. Chorus Determines the depth of the chorus effects applied to the microphone sound. Level Reduction Determines the amount of reduction to be applied to the overall sound (excepting the microphone input)-allowing you to effectively adjust the balance between your voice and the overall instrument sound. NOTICE The settings here are lost if you turn off the power without carrying out the Save operation. NOTE To adjust Pan and Reverb/Chorus settings for the microphone/guitar sound when "Vocal" or "Guitar" is selected, use the Mic part settings on the Mixer display (page 100). 8 Microphone PSR-A5000 Reference Manual 93