Yamaha PSR-EW410 PSR-E463 PSR-EW410 Owners Manual - Page 25
Creating Original Sounds via the Knobs, Assigning Functions to the Knobs, Switching the Target
![]() |
View all Yamaha PSR-EW410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Creating Original Sounds via the Knobs Quick Guide The two knobs can be used to add variations to the sound being played, transforming the sound in a variety of musical ways. Select the desired pre-programmed function combination printed above the knobs, then rotate the knobs as you play, for an expressive, dynamic performance. Assigning Functions to the Knobs Repeatedly press the [KNOB ASSIGN] button to sequentially assign the function combinations provided: z x c v b z ... etc. The current combination is shown in the display. GrandPno 001 Current function The target differs depending on the selected number. Function Target 1 CUTOFF/RESONANCE Main Voice, Dual Voice, Style and 2 REVERB/CHORUS Groove 3 DSP Main Voice, Dual Voice, Style, Groove and User Song 4 ATTACK/RELEASE Main Voice and Dual Voice 5 VOLUME BALANCE/ RETRIGGER RATE Knob A: Audio input from the external device, and Style/ Groove/Song Knob B: Groove For details about each function, refer to page 57. NOTE • Only selecting a function combination will not affect the sound even if the knob arrow is not at the center position. The selected function only works when the knob is moved. • Depending on the panel settings or how you move the knob, you may not notice any change to the parameter value, or you may hear a noise, or the knob may not work properly, even if you rotate it. Switching the Target Press the [TARGET] button to switch the target controlled with the knobs. The current target is shown in the display. • KEYBOARD: Main Voice, Dual Voice and User Song (only Function 3) • BACKING: Style, Groove and User Song (only Function 3) NOTE • The target differs depending on the selected function. • The target is memorized for each function. Using the Knobs Here is an example of how to use the knobs. For some other ideas for using the knobs, refer to page 58. 1 Select the desired Main Voice (page 20). Here, select Voice No.156 "SquareLD" (Square Lead) as a synth-lead type Voice. 2 Press the [KNOB ASSIGN] button several times until z appears in the display. 3 Press the [TARGET] button to switch the target to KEYBOARD. 4 Rotate knob B all the way to the right (maximum), then play the keyboard with your right hand while operating the knob A with your left. CUTOFF RESONANCE NOTICE • After selecting z, x or c by pressing the [KNOB ASSIGN] button, changing the Voice will replace the settings created via the knobs with the default settings of the new Voice. If you want to keep the settings you have created, make sure to memorize it to Registration Memory (page 44) before selecting a different Voice. NOTE • Rotating a knob to the right while the volume is set to a high level may result in distortion. If this occurs, reduce the volume level. PSR-E463/PSR-EW410 Owner's Manual 25
![](/manual_guide/products/yamaha-psrew410-psre463-psrew410-owners-manual-4a1c1b1/25.png)