Yamaha PSR-EW410 PSR-E463 PSR-EW410 Owners Manual - Page 35

Loading a Sample from a USB Flash Drive, LoadSMPL, Del SMPL

Page 35 highlights

Quick Guide Playing with Quick Sampling Loading a Sample from a USB Flash Drive IMPORTANT • If the instrument is in the Quick Sampling mode, press the [QUICK SAMPLING] button to exit from the mode, and then follow the steps below. NOTICE • The loading operation will overwrite and erase previously existing samples. Save important data you want to keep to a USB flash drive (page 34). 1 Connect a USB flash drive to the [USB TO DEVICE] terminal. For details, refer to "Connecting a USB Flash Drive" on page 71. 2 Hold the [FUNCTION] button for longer than a second to call up the File Control display. To cancel the operation, press the [FUNCTION] button again to exit from the File Control display. 3 Use the CATEGORY [] buttons to call up "LoadSMPL." LoadSMPL 4 Press the [0/EXECUTE] button. "PressKey" appears on the display. 5 Press the appropriate key in the Sample Zone to which you want to assign the sample. 6 Use the [+/YES] and [-/NO] buttons to select the file name to load. You cannot select a sample that loops (SMPLL001-SMPLL250) for assigning to Sample Zone A. 7 Press the [0/EXECUTE] button. "LoadOK?" appears on the display. 8 Press the [0/EXECUTE] or [+/YES] button again. "Loading" appears on the display and the sample will be saved to the USB flash drive. 9 Press the [FUNCTION] button to exit from the File Control display. 10 Try playing with the loaded samples. Press the [VOICE] button and select the Voice number 759 "Smpl Vce" for the Main Voice. Pressing the appropriate key in the Sample Zone (to which you assigned the sample) to play the sound. Deleting a Sample in the USB Flash Drive IMPORTANT • If the instrument is in the Quick Sampling mode, press the [QUICK SAMPLING] button to exit from the mode, and then follow the steps below. 1 Connect a USB flash drive to the [USB TO DEVICE] terminal. For details, refer to "Connecting a USB Flash Drive" on page 71. 2 Hold the [FUNCTION] button for longer than a second to call up the File Control display. To cancel the operation, press the [FUNCTION] button again to exit from the File Control display. 3 Use the CATEGORY [] buttons to call up "Del SMPL." Del SMPL 4 Press the [0/EXECUTE] button. 5 Use the [+/YES] and [-/NO] buttons to select the file name to delete. 6 Press the [0/EXECUTE] button. "Del OK?" appears on the display. 7 Press the [0/EXECUTE] or [+/YES] button again. "Deleting" appears on the display and the sample is deleted from the USB flash drive. 8 Press the [FUNCTION] button to exit from the File Control display. If the instrument is in the File Control display, no sound comes out even if you press the keyboard. PSR-E463/PSR-EW410 Owner's Manual 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Playing with Quick Sampling
PSR-E463/PSR-EW410
Owner’s Manual
35
Quick Guide
1
Connect a USB flash drive to the [USB
TO DEVICE] terminal.
For details, refer to “Connecting a USB Flash
Drive” on page 71.
2
Hold the [FUNCTION] button for longer
than a second to call up the File Control
display.
To cancel the operation, press the [FUNCTION]
button again to exit from the File Control display.
3
Use the CATEGORY [<<] and [>>] but-
tons to call up “LoadSMPL.”
4
Press the [0/EXECUTE] button.
“PressKey” appears on the display.
5
Press the appropriate key in the Sample
Zone to which you want to assign the
sample.
6
Use the [+/YES] and [-/NO] buttons to
select the file name to load.
You cannot select a sample that loops
(SMPLL001–SMPLL250) for assigning to Sample
Zone A.
7
Press the [0/EXECUTE] button.
“LoadOK?” appears on the display.
8
Press the [0/EXECUTE] or [+/YES] button
again.
“Loading” appears on the display and the sample
will be saved to the USB flash drive.
9
Press the [FUNCTION] button to exit
from the File Control display.
10
Try playing with the loaded samples.
Press the [VOICE] button and select the Voice
number 759 “Smpl Vce” for the Main Voice.
Pressing the appropriate key in the Sample Zone
(to which you assigned the sample) to play the
sound.
1
Connect a USB flash drive to the [USB
TO DEVICE] terminal.
For details, refer to “Connecting a USB Flash
Drive” on page 71.
2
Hold the [FUNCTION] button for longer
than a second to call up the File Control
display.
To cancel the operation, press the [FUNCTION]
button again to exit from the File Control display.
3
Use the CATEGORY [<<] and [>>] but-
tons to call up “Del SMPL.”
4
Press the [0/EXECUTE] button.
5
Use the [+/YES] and [-/NO] buttons to
select the file name to delete.
6
Press the [0/EXECUTE] button.
“Del OK?” appears on the display.
7
Press the [0/EXECUTE] or [+/YES] button
again.
“Deleting” appears on the display and the sample
is deleted from the USB flash drive.
8
Press the [FUNCTION] button to exit
from the File Control display.
If the instrument is in the File Control display, no
sound comes out even if you press the keyboard.
Loading a Sample from a USB
Flash Drive
• If the instrument is in the Quick Sampling mode, press the
[QUICK SAMPLING] button to exit from the mode, and then
follow the steps below.
• The loading operation will overwrite and erase previously
existing samples. Save important data you want to keep to
a USB flash drive (page 34).
IMPORTANT
NOTICE
LoadSMPL
Deleting a Sample in the USB
Flash Drive
• If the instrument is in the Quick Sampling mode, press the
[QUICK SAMPLING] button to exit from the mode, and then
follow the steps below.
IMPORTANT
Del SMPL