Yamaha RX-V1600 Owner's Manual - Page 111
Using the control mode of Zone 2 and Zone 3, Adjusting the volume level of Zone 2 or, Zone 3
UPC - 027108924229
View all Yamaha RX-V1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
■ Adjusting the volume level of Zone 2 or Zone 3 Rotate VOLUME on the front panel (or press VOLUME +/- on the remote control) to adjust the volume level of the selected zone. Control range: -80 dB to +16.5 dB Control step: 0.5 dB VOLUME + or VOLUME - Note VOLUME +/- can be used only when ZONE2 VOL or ZONE3 VOL is set to VAR in ZONE SET (see page 87). y Press MUTE to mute the sound output to the selected zone. ■ Adjusting the tonal quality of Zone 2 or Zone 3 Press CH +/- and TV VOL +/- on the remote control to adjust the high-frequency response (TREBLE) and the low-frequency response (BASS) respectively. Control range: -10 dB to +10 dB Control step: 2 dB + + CH TV VOL - - Note Check that "ZONE 2" or "ZONE 3" is displayed in the display window of the remote control before you adjust the tonal quality of the corresponding zone (see page 106). y You can also adjust the tonal quality of Zone 2 or Zone 3 by using TONE CONTROL on the front panel. For details, see "Adjusting the tonal quality" on page 38. ZONE 2/ZONE 3 Using the control mode of Zone 2 and Zone 3 POWER and STANDBY on the remote control work differently depending on the selected zone that appears in the display window. • When the normal, Zone 2 or Zone 3 mode is selected, you can turn on this unit, Zone 2 or Zone 3 or set them to the standby mode individually. • When the all mode is selected, pressing POWER turns on this unit, Zone 2 and Zone 3 simultaneously and pressing STANDBY sets them to the standby mode simultaneously. Control mode LCD display POWER and STANDBY Normal mode Name of component Turns on the main unit only or sets it to the standby mode. "ZONE 2" or "2:name Turns on Zone 2 or Zone 2 mode of the selected sets it to the standby component" mode. "ZONE 3" or "3:name Turns on Zone 3 or Zone 3 mode of the selected sets it to the standby component" mode. All mode "ALL" POWER: turns on the main unit, Zone 2 and Zone 3. STANDBY: sets the main unit, Zone 2 and Zone 3 to the standby mode. Note In the normal mode, MAIN appears for a few seconds when POWER or STANDBY is pressed. ADVANCED OPERATION 107