Yamaha RX-V1600 Owner's Manual - Page 8
Installing batteries in the remote controls, Installing batteries, Zone 2/Zone 3 remote control
UPC - 027108924229
View all Yamaha RX-V1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
GETTING STARTED Installing batteries in the remote controls Notes • Change all of the batteries if you notice conditions such as the operation range of the remote control decreases, the indicator does not flash, or its light or display window become dim. • Do not use old batteries together with new ones. • Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color. • If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. • Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations. ■ Installing batteries ■ Zone 2/Zone 3 remote control 2 1 3 2 1 3 1 Press the part and slide the battery compartment cover off. 1 Press the part and slide the battery compartment cover off. 2 Insert two supplied batteries (AAA, R03) according to the polarity markings (+ and -) on the inside of the battery compartment. 2 Insert four supplied batteries (AAA, R03) according to the polarity markings on the inside of the battery compartment. 3 Slide the cover back until it snaps into place. 3 Slide the cover back until it snaps into place. If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the remote control code and program any acquired functions that may have been cleared. 4