Yamaha RX-V1600 Owner's Manual - Page 21

PREPARATION PRESENCE/ZONE 2(3) terminals Connect presence speakers to these terminals. Note You can also use these terminals to connect the Zone 2 speakers (see page 105). 1 Open the tab. CONNECTIONS ■ Speaker layout Refer to the following illustration as to where to place each speaker in your listening room. 9 10 2 4 1 7 3 8 5 6 2 Insert one bare wire into the hole of each terminal. 3 Return the tab to secure the wire. 1 Subwoofer 2 Front right speaker 3 Front left speaker 4 Center speaker 5 Surround back right speaker 6 Surround back left speaker 7 Surround right speaker 8 Surround left speaker 9 Presence right speaker 10 Presence left speaker ■ Connecting the banana plug (With the exception of U.K., Europe and Asia models) First, tighten the knob and then insert the banana plug connector into the end of the corresponding terminal. Banana plug (With the exception of U.K., Europe and Asia models) y You can also use banana plugs with the PRESENCE/ZONE 2(3) speaker terminals. Open the tab, then insert one banana plug connector into the hole of each terminal. Do not attempt to close the tabs after connecting the banana plugs. 17