Yamaha RX-V1600 Owner's Manual - Page 117

Tuner, XM Satellite Radio, Problem, Cause, Remedy, Status message

Get Yamaha RX-V1600 PDF manuals and user guides
UPC - 027108924229
View all Yamaha RX-V1600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 117 highlights

■ Tuner TROUBLESHOOTING Problem Cause Remedy FM stereo reception is noisy. The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Check the antenna connections. Try using a high-quality directional FM antenna. Use the manual tuning method. There is distortion, and There is multipath interference. clear reception cannot be obtained even with a FM good FM antenna. Adjust the antenna position to eliminate multipath interference. The desired station cannot be tuned in with the automatic tuning method. The signal is too weak. Use a high-quality directional FM antenna. Use the manual tuning method. Previously preset stations can no longer be tuned in. This unit has been disconnected for a Preset the stations again. long period. The desired station cannot be tuned in with the automatic tuning method. The signal is weak or the antenna connections are loose. Tighten the AM loop antenna connections and orient it for the best reception. Use the manual tuning method. AM There are continuous crackling and hissing noises. Noises result from lightning, fluorescent lamps, motors, thermostats and other electrical equipment. Use an outdoor antenna and a ground wire. This will help somewhat, but it is difficult to eliminate all noise. There are buzzing and whining noises. A TV set is being used nearby. Move this unit away from the TV. See page 29 47 - 29 47 47 - 47 - - ■ XM Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Status message Cause Remedy See page CHECK ANTENNA The XM Connect-and-Play digital antenna accessory is not connected, or does not work properly. Check the XM Connect-and-Play digital antenna accessory connections. 52 UPDATING NO SIGNAL The XM user encryption code is being updated. Wait until the encryption code is updated. - The signal is too weak. Check the XM Connect-and-Play digital antenna accessory connections and orient it for the best 52 reception. LOADING It takes longer than four seconds for audio or text data to be decoded. Wait until the decoding process has finished. - OFF AIR - - - The XM Satellite Radio channel you selected is not currently broadcasting any signal. Check the channel number again or select another XM Satellite Radio channel. 56 The channel Station ID (SID) is no longer available. --- / --- No artist name/feature or song/program title is available. - - - No channels are available for the selected category. Select another channel category by pressing CATEGORY (or A-E/CAT. l / h on the remote control) repeatedly. 56 ADDITIONAL INFORMATION 113

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
113
TROUBLESHOOTING
ADDITIONAL
INFORMATION
■
Tuner
■
XM Satellite Radio
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
Problem
Cause
Remedy
See
page
FM
FM stereo reception is
noisy.
The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away or
the antenna input is poor.
Check the antenna connections.
Try using a high-quality directional FM
antenna.
29
Use the manual tuning method.
47
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
There is multipath interference.
Adjust the antenna position to eliminate
multipath interference.
—
The desired station
cannot be tuned in with
the automatic tuning
method.
The signal is too weak.
Use a high-quality directional FM antenna.
29
Use the manual tuning method.
47
Previously preset
stations can no longer
be tuned in.
This unit has been disconnected for a
long period.
Preset the stations again.
47
AM
The desired station
cannot be tuned in with
the automatic tuning
method.
The signal is weak or the antenna
connections are loose.
Tighten the AM loop antenna connections
and orient it for the best reception.
—
Use the manual tuning method.
47
There are continuous
crackling and hissing
noises.
Noises result from lightning,
fluorescent lamps, motors,
thermostats and other electrical
equipment.
Use an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
—
There are buzzing and
whining noises.
A TV set is being used nearby.
Move this unit away from the TV.
—
Status message
Cause
Remedy
See
page
CHECK ANTENNA
The XM Connect-and-Play digital antenna
accessory is not connected, or does not
work properly.
Check the XM Connect-and-Play digital antenna
accessory connections.
52
UPDATING
The XM user encryption code is being
updated.
Wait until the encryption code is updated.
—
NO SIGNAL
The signal is too weak.
Check the XM Connect-and-Play digital antenna
accessory connections and orient it for the best
reception.
52
LOADING
It takes longer than four seconds for audio
or text data to be decoded.
Wait until the decoding process has finished.
—
OFF AIR
The XM Satellite Radio channel you
selected is not currently broadcasting any
signal.
Check the channel number again or select another
XM Satellite Radio channel.
56
<XM> - - -
The channel Station ID (SID) is no longer
available.
- - -
/
- - -
No artist name/feature or song/program
title is available.
<CAT> - - -
No channels are available for the selected
category.
Select another channel category by pressing
CATEGORY (or A-E/CAT.
l
/
h
on the remote
control) repeatedly.
56