Yamaha RX-V1600 Owner's Manual - Page 43
Selecting the MULTI CH INPUT, Enjoying multi-channel software in, 1/7.1 channel surround - reset
UPC - 027108924229
View all Yamaha RX-V1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
BASIC OPERATION ■ Selecting the MULTI CH INPUT Press MULTI CH INPUT on the front panel or MULTI CH IN on the remote control so that MULTI CH INPUT appears in the front panel display and on the video monitor. MULTI CH INPUT MULTI CH IN or Front panel Remote control Note When MULTI CH INPUT is shown in the front panel display and the video monitor, no other source can be played. To select another input source with the INPUT selector on the front panel (or one of the input selector buttons on the remote control), press MULTI CH INPUT so that MULTI CH INPUT disappears from the front panel display and the video monitor. ■ Enjoying multi-channel software in 6.1/7.1 channel surround If you connected one or two surround back speakers, use this feature to enjoy 6.1/7.1-channel playback for multi-channel sources using the Dolby Pro Logic x, Dolby Digital EX or DTS-ES decoders. 1 Set AMP/SOURCE/TV to AMP and then press EXTD SUR. on the remote control to switch between 5.1 and 6.1/7.1 channel playback. AMP SOURCE TV EXTD SUR. 8 2 Press l / h repeatedly to select a decoder when the name of a decoder (PL xMovie, for example) is displayed in the front panel display. PRESET/CH A-E/CAT. ENTER PLAYBACK Auto AUTO If a signal flag can be recognized, the unit selects the optimum decoder to play back the signal in 6.1/7.1 channels. If the signal flag cannot be recognized, or no flag is present in the input signal, this unit cannot automatically play back the signal in 6.1/7.1 channels. Decoders You can select a decoder from the following list depending on the format of the software you are playing. PLIIxMovie To play back Dolby Digital or DTS signals in 7.1 channels using the Pro Logic x movie decoder. PLIIxMusic To play back Dolby Digital or DTS signals in 6.1/7.1 channels using the Pro Logic x music decoder. EX/ES To play back Dolby Digital signals in 6.1/7.1 channels using the Dolby Digital EX decoder. DTS signals are played back in 6.1/7.1 channels using the DTS-ES decoder. EX To play back Dolby Digital or DTS signals in 6.1/7.1 channels using the Dolby Digital EX decoder. OFF To play back Dolby Digital or DTS signals in 5.1 channels. y When SB L/R SP is set to LRGx1 or SMLx1 (see page 79), the surround back channel will output from the left SURROUND BACK speaker terminals. Notes • Some 6.1-channel compatible discs do not have a signal flag which cannot be automatically detected. When you play these kinds of discs in 6.1-channel, select decoders (PL xMovie, PL xMusic, EX/ES or EX) manually. • 6.1/7.1-channel playback is not possible even if EXTD SUR. is pressed in the following cases: - When SUR. L/R SP or SB L/R SP is set to NONE (see page 79). - When the source connected to the MULTI CH INPUT jacks are being played. - When the source being played does not contain surround L/R channel signals. - When a Dolby Digital KARAOKE source is being played. - When 2ch Stereo, 7ch Stereo or PURE DIRECT is selected. • When the power of this unit is turned off, the input mode will be reset to AUTO. • The Pro Logic x decoder is not available when SB L/R SP is set to NONE (see page 79). • PL xMovie cannot be selected when SB L/R SP is set to LRGx1 or SMLx1 (see page 79). 39