Yamaha RX-V1600 Owner's Manual - Page 90
Bmemory Guard, Caudio Select, Ddecoder Mode
UPC - 027108924229
View all Yamaha RX-V1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
MANUAL SETUP HDMI interlace/progressive up-conversion HDMI I/P Use this feature to activate or deactivate the HDMI I/P upconversion of the analog video signals input at the composite video, S-video and component video jacks so that the analog video signals deinterlaced from 480i to 480p are output at the HDMI OUT jack. Choices: ON, OFF • Select ON to activate the HDMI I/P up-conversion of the analog video signals. • Select OFF to deactivate the HDMI I/P up-conversion of the analog video signals. Notes • This menu item is not available and hence not visible in the OSD if V CONV. is set to OFF. • When the analog video signals with 1080i or 720p of resolution are up-converted to HDMI and output at the HDMI OUT jack, the picture quality may worsen. ■ Memory guard B)MEMORY GUARD Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: ON, OFF B)MEMORY GUARD [ON OFF []:Adjust ■ Audio select C)AUDIO SELECT Use this feature to designate the default input mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Choices: AUTO, LAST C)AUDIO SELECT [AUTO LAST []:Adjust • Select AUTO if you want this unit to automatically detect the type of input signals and select the appropriate input mode. • Select LAST if you want this unit to automatically select the last input mode used for the connected input source. Note Selecting LAST does not recall the last setting for the EXTD SUR. button. ■ Decoder mode D)DECODER MODE Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. See page 43 for details about the input mode. Choices: AUTO, LAST • Select ON to protect the following system parameters. - DSP program parameters - All SET MENU items except MEMORY GUARD - All speaker levels - The on-screen display (OSD) mode • Select OFF to deactivate the memory guard feature. Notes • When MEMORY GUARD is set to ON, you cannot use the test tone or select any other SET MENU items. • When MEMORY GUARD is set to ON, "MEMORY GUARD!" appears in the OSD and in the front panel display when you try to adjust the protected system parameters. D)DECODER MODE [AUTO LAST []:Adjust • Select AUTO to if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode. • Select LAST to if you want this unit to automatically select the last decoder mode used for the connected input source. Note Selecting LAST does not recall the last setting for the EXTD SUR. button. 86