Yamaha RX-V1600 Owner's Manual - Page 119
Before AUTO SETUP, During AUTO SETUP, Error message, Cause, Remedy - optimizer microphone
UPC - 027108924229
View all Yamaha RX-V1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
■ AUTO SETUP Before AUTO SETUP Error message Cause Connect MIC! Unplug HP! Optimizer microphone is not connected. Headphones are connected. TROUBLESHOOTING Remedy Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. Unplug the headphones. See page 32 - During AUTO SETUP Error message E-1:NO FRONT SP E-2:NO SURR.SP E-3:NO PRNS SP E-4:SBR->SBL E-5:NOISY E-6:CHECK SUR. E-7:NO MIC E-8:NO SIGNAL E-9:USER CANCEL E-10:INTERNAL ERROR Cause Remedy Front L/R channel signal(s) is (are) not detected. Select the front speakers with SPEAKER A or B. Check the front L/R speaker connections. A surround channel signal is not detected. Check the surround speaker connections. A presence channel signal is not detected. Check the presence speaker connections. Only right surround back channel signal is detected. Connect the surround back speaker to the LEFT SURROUND BACK SPEAKERS terminal if you only have one surround back speaker. Background noise is too loud. Try running AUTO SETUP in a quiet environment. Turn off noisy electric equipment like air conditioners or move them away from the optimizer microphone. Surround back speaker(s) is (are) connected, though surround L/R speakers are not. Connect surround speakers when you use (a) surround back speaker(s). The optimizer microphone was unplugged Connect the supplied optimizer microphone to during the AUTO SETUP procedure. OPTIMIZER MIC jack on the front panel. The optimizer microphone does not detect Check the microphone setting. test tones. Check the speaker connections and placement. The AUTO SETUP procedure was cancelled due to user activity. Run AUTO SETUP again. An internal error occurred. Run AUTO SETUP again. See page - 15 15 15 15 - - 15 32 32 15 32 32 ADDITIONAL INFORMATION 115