ZyXEL MES3500-24F User Guide - Page 326

Chapter 43 ARP Table 43.2 The ARP Table Screen Click Management > ARP Table in the navigation panel to open the following screen. Use the ARP table to view IP-to-MAC address mapping(s) and remove specific dynamic ARP entries. Figure 200 Management > ARP Table The following table describes the labels in this screen. Table 140 Management > ARP Table LABEL Condition DESCRIPTION Specify how you want the Switch to remove ARP entries when you click Flush. Select All to remove all of the dynamic entries from the ARP table. Select IP Address and enter an IP address to remove the dynamic entries learned with the specified IP address. Flush Cancel Index IP Address MAC Address VID Port Type Select Port and enter a port number to remove the dynamic entries learned on the specified port. Click Flush to remove the ARP entries according to the condition you specified. Click Cancel to return the fields to the factory defaults. This is the ARP table entry number. This is the learned IP address of a device connected to a Switch port with the corresponding MAC address below. This is the MAC address of the device with the corresponding IP address above. This field displays the VLAN to which the device belongs. This field displays the port to which the device connects. CPU means this learned IP address is the Switch's management IP address. This shows whether the MAC address is dynamic (learned by the Switch) or static (manually entered in the Static MAC Forwarding screen). 326 MES3500-24/24F User's Guide