ZyXEL NWA1121-NI User Guide - Page 21
Methods of Restoring Factory-Defaults, Introducing the Web Configurator - default ip
View all ZyXEL NWA1121-NI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 2 Introducing the Web Configurator factory-default configuration file. This means that you will lose all the settings you previously configured. The password will be reset to "1234". Figure 8 The RESET Button 2.2.1 Methods of Restoring Factory-Defaults You can erase the current configuration and restore factory defaults in two ways: Use the RESET button to upload the default configuration file. Hold this button in for about 3 seconds (the light will begin to blink). Use this method for cases when the password or IP address of the NWA1121-NI is not known. Use the web configurator to restore defaults (refer to Section 11.8 on page 124). NWA1121-NI User's Guide 21
Chapter 2 Introducing the Web Configurator
NWA1121-NI User’s Guide
21
factory-default configuration file. This means that you will lose all the settings you previously
configured. The password will be reset to “1234”.
Figure 8
The RESET Button
2.2.1
Methods of Restoring Factory-Defaults
You can erase the current configuration and restore factory defaults in two ways:
Use the
RESET
button to upload the default configuration file. Hold this button in for about 3
seconds (the light will begin to blink). Use this method for cases when the password or IP address
of the NWA1121-NI is not known.
Use the web configurator to restore defaults (refer to
Section 11.8 on page 124
).