ZyXEL NWA1121-NI User Guide - Page 96
LAN IP Screen
View all ZyXEL NWA1121-NI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 7 LAN 7.4 LAN IP Screen Use this screen to configure the IP address for your NWA1121-NI. Click Network > LAN to display the following screen. Figure 42 LAN IP The following table describes the labels in this screen. Table 29 LAN IP LABEL IPv4 Address Assignment Obtain IP Address Automatically DESCRIPTION Select this option if your NWA1121-NI is using a dynamically assigned IPv4 address from a DHCP server each time. Use Fixed IP Address IP Address Note: You must know the IP address assigned to the NWA1121-NI (by the DHCP server) to access the NWA1121-NI again. Select this option if your NWA1121-NI is using a static IPv4 address. When you select this option, fill in the fields below. Enter the IP address of your NWA1121-NI in dotted decimal notation. Subnet Mask Gateway IP Address Note: If you change the NWA1121-NI's IP address, you must use the new IP address if you want to access the web configurator again. Type the subnet mask. Type the IPv4 address of the gateway. The gateway is an immediate neighbor of your NWA1121-NI that will forward the packet to the destination. On the LAN, the gateway must be a router on the same segment as your NWA1121-NI; over the WAN, the gateway must be the IP address of one of the remote nodes. 96 NWA1121-NI User's Guide