1994 Chevrolet Astro Owner's Manual - Page 274

Using Foam-Type Cleaner on Fabric 0 Vacuum and brush the area to removeany loose dirt. Always clean a whole trim panel or section. Mask su bunding trim along stitch or welt lines. 0 Mix Multi-Purpose Powdered Cleaner following the directions on the container label. Use suds only and apply with a clean sponge. Don't saturate the material. Don't rub it roughly. As soon as you've cleaned the section, use a sponge to remove the suds. 0 0 8 0 0 Rinse the section with a clean, wet sponge. Wipe off what's left witha slightly damp paper towel cloth. or Then dry it immediately with a blow dryer or a heat lamp. NOTICE: Be careful witha hair dryer or heat lamp. could scorch the You fabric. 0 Wipe with a clean cloth. Using Solvent-Type Cleaner on Fabric First, see if you have to use solvent-type cleaner at all. Some spots and stains will clean off better with just water and mild soap. If you need to usea solvent: 0 Gently scrape excess soil from the trim material with clean, dull knife a or scraper. Use very little cleaner, light pressure and clean cloths (preferably cheesecloth). Cleaning shouldstart at the outside of the stain, "feathering" toward the center. Keep changingto a clean section of the cloth. When you clean a stain from fabric, immediately dry the area with an air hose, hair dryer, heat lamp to help prevent a cleaning ring. (See or the previousNOTICE.) 0 6-56