1994 Chevrolet Lumina Owner's Manual - Page 186

Service & Appearance Care Back-up Light Bulb Replacement See "Replacement Bulbs" in the Index to :heck the size and type of bulb you need o use. 4. Pull the back-up light assembly from the vehicle. Windshield Wiper Blade Replacement Replacement blades come in different types and are removed in different ways. Here's how to remove the type with a release clip: 1. Pull the windshield wiper arm away from the windshield. 5. Push the tab on the socket and turn the socket counterclockwise. 6. Pull the socket from the back-up assembly. T Replace the Bulb: o I . Open the trunk and move the carpet away from the back of the vehicle. 7. To remove the bulb, pull it out of the socket. Do not twist the bulb. 2. Remove both tail/stop/turn signal assemblies as described earlier in this section. 8. Push the new bulb into the socket. 9. Reverse steps 1-5 to replace the light assemblies. 2. Lift the release clip with a screwdriver and pull the blade assembly offthe wiper arm. .3. * Remove the four wing nuts behind tht back-up assembly. 3. Push the new wiper blade securely the wiper arm. on