1996 Chevrolet Tahoe Owner's Manual - Page 291

Front Parkingfirn Signal Lamps with Sealed Beam Headlamps 1. Remove the two screws , I , , ~ , 3. Squeeze the tab on the side of the lamp socket while turning the socket to the left. at the inside edge of the parkinghurn signal lamp assembly. b 4. Pull the socket out of the lamp assembly. 2. Remove the lamp assembly by swinging it out from the inside edge and sliding it out at the outside edge. 5. Push in gently on the bulb, turn it to the left and remove it from the socket. 6. Put the new bulb in the socket, gently press in on the bulb and turn it to the right until it is tight. 7. Put the socket back into the lamp assembly and turn it to the right until it locks. 8. Put the parkinghrn signal lamp assembly back into the vehicle and tighten the screws. 6-38