1996 Chevrolet Tahoe Owner's Manual - Page 295

4. Remove the screws from the bulb retainer and take the bulb retainer off of the lamp assembly. Windshield Wiper Blade Replacement For proper type and length, see "Normal Maintenance Replacement Parts" in'the Index. To replace the windshield wiper blade assembly: 5. Pull the old bulb straight out of the socket. 6. Put in a new bulb and push it in until it is tight. 7. Replace the bulb retainer. 8. Replace the rear lamp assembly and tighten the screws. You may want to use a magnetic screwdriver when installing the screws. 9. Close the tailgate or rear doors. 1. Lift the wiper arm and rotate the blade until it is.. facing away from the windshield. 2. Push the release lever and slide the wiper assembly toward the driver's side of the vehicle. 3. Install a new blade by reversing Steps 1 and 2. 6-42 . =.