2002 Ford Focus Owner Guide 4th Printing - Page 120

Locks and Security Replacing lost transmitters If a remote transmitter has been lost and you would like to remove it from the vehicle's memory, or you would like to purchase additional transmitters for your vehicle (up to four may be programmed into memory), take all your vehicle's remote transmitters either to your dealer or perform the programming procedure yourself. It will be necessary to reprogram all the remote transmitters to your vehicle at the same time while performing this service. Programming procedure 1. Close all doors and fasten the seat belt to ensure conflicting chimes do not sound during programming. 2. Turn the ignition lock from OFF (2) to ON/RUN (3) at least 4 times in 6 seconds. 3. Switch off the ignition. Now the control module has entered the learning mode" for 10 seconds. This mode is indicated by a chime. 4. While the control module is in the learning mode", press and hold one of the buttons of the remote transmitter until a chime sounds. This indicates a new transmitter code has been successfully received. After each successful programming, another 10 second learning mode" is automatically entered, up to a maximum of four times. Another transmitter can now be programmed (repeat step 4). 120 1