2002 Ford Focus Owner Guide 4th Printing - Page 78

Lights 5. Locate the vertical adjuster on each headlamp. Using a 7 mm Allen head wrench, turn the adjuster either clockwise (to adjust down) or counterclockwise (to adjust up). The high intensity area should touch the horizontal reference line. Note: HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NONĆADJUSTABLE. 6. Close the hood and turn off the lamps. VOL On vehicles fitted with VOL (HID) headlamps, have your Ford Dealer change the headlamp bulbs. There is a risk of injury due to high voltage. 1. Park the vehicle on a level surface approximately 7.6 meters (25 feet) from a vertical wall or screen directly in front of it. 2. Measure the height of the headlamp bulb center from the ground, subtract 53.3 mm (2.1 inches), and make a 2.5 meters (8 foot) horizontal reference line on the vertical wall or screen at this height. (A piece of masking tape works well.) 3. Open the hood. 4. Remove the battery cover. 78