2002 Ford Focus Owner Guide 4th Printing - Page 272

Maintenance and Specifications • If the oil level is between the MIN and MAX marks (2.0 SPI engine) or between ADD and FULL (2.0 ZetecĆengine), the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below the MIN/ADD mark, add enough oil to raise the level within the MIN-MAX/ADD-FULL range. • Oil levels above the MAX/FULL mark may cause engine damage. Some oil must be removed from the engine by a service technician. 7. Put the indicator back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter. 2. If the engine oil level is not within the MIN and MAX/ADD and FULL ranges, add only certified engine oil of the recommended viscosity. Remove the engine oil filler cap and use a funnel to pour the engine oil into the opening. 3. Recheck the oil level. Make sure the oil level is not above the MAX mark (2.0 SPI engine) or the FULL mark (2.0 ZetecĆ engine) on the dipstick. 4. Replace oil filler cap and ensure it is fully tightened. 2.0 SPI engine 2.0 ZetecĆengine 272