2010 Jeep Patriot Owner's Manual - Page 192

UNDERSTANDING YOUR INSTRUMENT PANEL 191 to switch the headlights to high beam, and pull toward 11. Seat Belt Reminder Light yourself (normal position) to return to low beam. When the ignition switch is first turned ON, this light will turn on for five to eight seconds as a bulb 10. Anti-Lock Brake (ABS) Light - If Equipped check. During the bulb check, if the driver's seat This light monitors the Anti-Lock Brake System belt is unbuckled, a chime will sound. After the bulb (ABS). The light will turn on when the ignition check or when driving, if the driver's seat belt remains switch is turned to the ON position and may unbuckled, the Seat Belt Reminder Light will illuminate stay on for as long as four seconds. and the chime will sound. Refer to "Occupant Restraints" If the ABS light remains on or turns on while driving, it in "Things To Know Before Starting Your Vehicle" for indicates that the Anti-Lock portion of the brake system further information. is not functioning and that service is required. However, 12. Tachometer the conventional brake system will continue to operate The white area of the scale shows the permissible engine normally if the BRAKE warning light is not on. revolutions-per-minute (RPM x 1000) for each gear range. If the ABS light is on, the brake system should be serviced Before reaching the red area, ease up on the accelerator to as soon as possible to restore the benefits of Anti-Lock prevent engine damage. brakes. If the ABS light does not turn on when the Ignition switch is turned to the ON position, have the light inspected by an authorized dealer. 4