2010 Jeep Patriot Owner's Manual - Page 434

MAINTAINING YOUR VEHICLE 433 1. Clean with a wet, soft rag. A mild soap solution may FUSES be used, but do not use high alcohol content or abrasive Integrated Power Module (IPM) cleaners. If soap is used, wipe clean with a clean, damp The Integrated Power Module (IPM) is located in the rag. engine compartment near the air cleaner assembly. This center contains cartridge fuses and mini-fuses. A label 2. Dry with a soft cloth. that identifies each component may be printed on the Seat Belt Maintenance inside of the cover. Refer to "Engine Compartment" in Do not bleach, dye or clean the seat belts with chemical "Maintaining Your Vehicle" for further information. solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the seat belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the seat belts from the car to wash them. Replace the seat belts if they appear frayed or worn or if the buckles do not work properly. Dry with a soft cloth. 7