2011 Mercedes CLS-Class Owner's Manual - Page 123
2011 Mercedes CLS-Class Manual
Page 123 highlights
219_AKB; 4; 54, en-US d2ureepe, 2009-05-11T16:21:02+02:00 - Seite 121 Version: 2.11.8.1 Control system 121 Lighting submenu Access the Lighting submenu via the Settings menu. Use the Lighting submenu to change the lamp and lighting settings on your vehicle. The following functions are available: RSwitching RSwitching RSetting RParking RTail lamps plate lamps daytime running lamp mode on or off (USA only) (Y page 121) locator lighting on or off (Y page 121) ambient lighting (Y page 122) lamps marker lamps RLicense RSide RSwitching night security illumination (Headlamps delayed shut-off feature) on or off (Y page 122) interior lighting delayed shut-off on or off (Y page 123) RSwitching Switching daytime running lamp mode on or off (USA only) X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Lighting submenu. X Press button & or * repeatedly until the message Headlamp Mode appears in the multifunction display. The selection marker is on the current setting. For more information on the daytime running lamp mode, see (Y page 88). For safety reasons, resetting all the functions of all submenus to the factory settings while driving (Y page 118) will not deactivate the daytime running lamp mode. The following message appears in the multifunction display: Lighting - Cannot be completely reset to factory settings while driving. Switching locator lighting on or off With the locator lighting feature activated and the exterior lamp switch in position Ã, the following lamps will come on during darkness when the vehicle is unlocked using button % on the SmartKey: RParking lamps RTail lamps plate lamps RLicense Z Controls in detail X Press button W or X to select the display shown in the standard display. The other display now appears in the Standard display menu (Y page 112). X Press button W or X to select manual operation (Manual) or daytime running lamp mode (Constant). With daytime running lamp mode switched on and the exterior lamp switch in position $ or Ã, the low-beam headlamps are switched on when the engine is running. In low ambient light conditions the following lamps will come on additionally: