2011 Mercedes CLS-Class Owner's Manual - Page 300
2011 Mercedes CLS-Class Manual
Page 300 highlights
219_AKB; 4; 54, en-US d2ureepe, 2009-05-11T16:21:02+02:00 - Seite 298 Version: 2.11.8.1 298 Fuels, coolants, lubricants, etc. Approved engine oils Engine oils are specifically tested for their suitability in our engines and durability for our service intervals. Therefore, only use approved engine oils and oil filters required for vehicles with the Maintenance System. For a listing of approved engine oils and oil filters, contact an authorized Mercedes-Benz Center or visit www.mbusa.com (USA only). Viscosity grades for engine oils Using the chart below, select oil viscosity according to the lowest air temperature expected before the next oil change. ! Using engine oils and oil filters of a specification other than those expressly required for the Maintenance System, or changing of oil and oil filter at change intervals longer than those called for by the Maintenance System will result in engine or emission control system damage not covered by the Mercedes-Benz Limited Warranty. Please follow Maintenance System recommendations for scheduled oil changes. Failure to do so will result in engine or emission control system damage not covered by the Mercedes-Benz Limited Warranty. Mercedes-Benz recommends MOBIL OIL. Use the table below to determine the MB sheet number. Model CLS 550 CLS 63 AMG Engine, type 273 156 MB sheet number 229.5 229.536 Technical data Engine oil additives ! Do not blend oil additives with engine oil. They may damage the engine. Damage or malfunctions resulting from blending oil additives are not covered by the MercedesBenz Limited Warranty. Air conditioning refrigerant R134a (HFC) refrigerant and special PAG lubricating oil are used in the air conditioning system. ! Never use R 12 (CFC) or mineral-based lubricating oil. Otherwise damage to the system will occur. Brake fluid G Warning! During vehicle operation, the boiling point of the brake fluid is continuously reduced through the absorption of moisture from the atmosphere. i MB sheet numbers are printed on the outside of oil containers. 36 Restriction: Only SAE 0W-40/SAE 5W-40 engine oils may be used.